KEEP OUT OF REACH OF CHILDREN
CAUTION: EYE IRRITANT. MAY BE HARMFUL IF SWALLOWED. May cause skin irritation. DO NOT get directly in eyes, on skin or ingest.
This Ingredients tab shows the ingredients in this product grouped into the
following categories: Active Ingredients, Intentionally Added, Fragrance Components
and Non-Functional Constituents. Ingredients that appear on a Designated List are
indicated by the blue
symbol. Fragrance allergens included on Annex II of the EU Cosmetics Regulation
No. 1223/2009 are indicated by the green
symbol.
Click here for more information on the Designated Lists.
Diluent: Adjusts the concentration of ingredients in a product to deliver target benefits.
Ingredient descriptions are provided by RESOLVE®.
CAS #: 7732-18-5
Ingredient descriptions are provided by RESOLVE®.
CAS #: 7732-18-5
Surfactant: Surface-active agent helps remove dirt, stains, and bad smells.
Ingredient descriptions are provided by RESOLVE®.
CAS #: 68585-47-7
Ingredient descriptions are provided by RESOLVE®.
CAS #: 68585-47-7
Complexing/Sequestering Agent: Binds hard water and other minerals to allow the cleaning actives to perform more effectively.
Ingredient descriptions are provided by RESOLVE®.
CAS #: 144538-83-0
Ingredient descriptions are provided by RESOLVE®.
CAS #: 144538-83-0
Antiredeposition Agent: Prevents the redeposition of soils back onto a surface, especially fabric surfaces.
Ingredient descriptions are provided by RESOLVE®.
CAS #: 28205-96-1
Ingredient descriptions are provided by RESOLVE®.
CAS #: 28205-96-1
Solvent: Solubilizes or dissolves at least one other substance to form a solution.
Ingredient descriptions are provided by RESOLVE®.
CAS #: 770-35-4
Ingredient descriptions are provided by RESOLVE®.
CAS #: 770-35-4
Fragrance: Changes the odor of a product to impart a pleasant odor or impart a pleasant fragrance in the air during or after product use.
Ingredient descriptions are provided by RESOLVE®.
CAS #: Fragrance
Ingredient descriptions are provided by RESOLVE®.
CAS #: Fragrance
Complexing/Sequestering Agent: Binds hard water and other minerals to allow the cleaning actives to perform more effectively.
Ingredient descriptions are provided by RESOLVE®.
CAS #: 77-92-9
Ingredient descriptions are provided by RESOLVE®.
CAS #: 77-92-9
Preservative: Preserves products from bacterial spoilage during transit and storage.
Ingredient descriptions are provided by RESOLVE®.
CAS #: 26172-55-4
Ingredient descriptions are provided by RESOLVE®.
CAS #: 26172-55-4
Preservative: Preserves products from bacterial spoilage during transit and storage.
Ingredient descriptions are provided by RESOLVE®.
CAS #: 2682-20-4
Ingredient descriptions are provided by RESOLVE®.
CAS #: 2682-20-4
Fragrance Component: A component of a fragrance oil.
Ingredient descriptions are provided by RESOLVE®.
CAS #: 18479-58-8
Ingredient descriptions are provided by RESOLVE®.
CAS #: 18479-58-8
Fragrance Component: A component of a fragrance oil.
Ingredient descriptions are provided by RESOLVE®.
CAS #: 25265-71-8
Ingredient descriptions are provided by RESOLVE®.
CAS #: 25265-71-8
Fragrance Component: A component of a fragrance oil.
Ingredient descriptions are provided by RESOLVE®.
CAS #: 97-53-0
Ingredient descriptions are provided by RESOLVE®.
CAS #: 97-53-0
This ingredient appears on one or more Designated Lists
AOEC Asthmagens: Chemicals designated as asthmagens by the Association of Occupational and Environmental Clinics. more info…
Fragrance Component: A component of a fragrance oil.
Ingredient descriptions are provided by RESOLVE®.
CAS #: 25498-49-1
Ingredient descriptions are provided by RESOLVE®.
CAS #: 25498-49-1
This ingredient appears on one or more Designated Lists
CA TACs : Chemicals identified as toxic air contaminants under Section 93000 or 93001 of Title 17 of the California Code of Regulations. more info…
Non-Functional Constituent: Non-Functional Constituent
Ingredient descriptions are provided by RESOLVE®.
CAS #: 7757-82-6
Ingredient descriptions are provided by RESOLVE®.
CAS #: 7757-82-6
This ingredient appears on one or more Designated Lists
CA Non-Cancer Hazards: Chemicals that are identified with noncancer endpoints and listed with an inhalation or oral reference exposure level by the Office of Environmental Health Hazard Assessment pursuant to paragraph (2) of subdivision (b) of Section 44360. more info…
Non-Functional Constituent: Non-Functional Constituent
Ingredient descriptions are provided by RESOLVE®.
CAS #: 10377-60-3
Ingredient descriptions are provided by RESOLVE®.
CAS #: 10377-60-3
This ingredient appears on one or more Designated Lists
IARC Carcinogens : Group 1, 2A, or 2B carcinogens identified by the International Agency for Research on Cancer. more info…
The list above contains the product ingredients listed in descending weight percent within each category. The ingredient names use the INCI (or equivalent) nomenclature system. Click here for more information on the nomenclature system.
Human Health
FIRST AID:
- If in eyes, IMMEDIATELY rinse eyes with plenty of water. Remove any contact lenses and continue rinsing eyes for at least 15 minutes. If irritation persists, get medical attention.
- If swallowed, rinse mouth and drink a glass of water. Call physician or Poison Control Center.
Questions? 1-800-228-4722
Click here Safety Data Sheet (United States - Spanish)
Storage and Disposal
Keep from freezing.
Usage Instructions
DIRECTIONS FOR USE:
NOTE: Always test a hidden section of the carpet for colorfastness. Always use a CLEAN, WHITE cloth to blot soils. Cloth should not be used with other cleaners or chemicals.
- For Spots and Stains on Carpets and Upholstery:
-
- Blot up soil with cloth.
- Spray Professional RESOLVE® Stain Remover Carpet Cleaner on soiled area.
- Allow 3 minutes to penetrate carpet fibers and loosen soil.
- Gently blot soil with cloth. Work from the edge towards the center of the spot.
- Rinse cloth as needed.
- Repeat process until carpet is clean.
- Blot any excess moisture with a clean, white cloth.
- For Traffic Lanes:
-
- Blot up any wet soils with cloth.
- Vacuum any loose soil or dirt from carpet.
- Spray on small area of carpet – an area 3’ x 10’ is recommended.
- Allow 3 minutes to penetrate carpet fibers and loosen soils and stains. DO NOT ALLOW SOLUTION TO DRY ON CARPET.
- Attach a clean bonnet pad to low-speed (up to 300 rpm) equipment. Lightly mist the bonnet pad for additional cleaning power and lubricity.
- Work the area with the bonnet pad to remove soils and stains. Change bonnet pad as it becomes soiled.
- Repeat process with a clean, water dampened bonnet pad to help remove any surfactant residue.
- Allow carpet to dry to minimize resoiling.
- For Pretreatment Prior to Extraction or Shampoo Cleaning:
-
- Lightly mist the area to be cleaned with Professional RESOLVE® Stain Remover Carpet Cleaner. Spray directly onto any noticeable spots or soils.
- Allow 3 minutes to penetrate carpet fibers and loosen soils.
- DO NOT ALLOW SOLUTION TO DRY ON CARPET. Begin extraction or shampoo cleaning immediately after pretreatment.
- Certain stains cause permanent discoloration even after cleaning.
- Do not mix with bleach or use with other chemicals.
- Not recommended for velvet or silk upholstery.
- Keep from freezing.
Claims listed within SmartLabel™ are either governed by entities such as the USDA, FDA, EPA, etc. or defined by participating brands.
Item Benefits / Features
NEUTRALIZES ODORS
CLEANS THE TOUGHEST SPOTS & STAINS
Professional RESOLVE® Stain Remover Carpet Cleaner has a unique formula to help make cleaning easier. Safe to use on wool, nylon and stain-resistant carpets.
Contains no phosphorus.
