KEEP OUT OF REACH OF CHILDREN
PRECAUTIONARY STATEMENTS: Hazards to Humans and Domestic Animals.
WARNING: Causes eye irritation. Do not get in eyes, on skin or on clothing. Wash thoroughly with soap and water after handling.
This Ingredients tab shows the ingredients in this product grouped into the
following categories: Active Ingredients, Intentionally Added, Fragrance Components
and Non-Functional Constituents. Ingredients that appear on a Designated List are
indicated by the blue
symbol. Fragrance allergens included on Annex II of the EU Cosmetics Regulation
No. 1223/2009 are indicated by the green
symbol.
Click here for more information on the Designated Lists.
Antimicrobial Active: The active in surface disinfectants and sanitizers to kill germs on surfaces.
Ingredient descriptions are provided by LYSOL®.
CAS #: 77-92-9
Ingredient descriptions are provided by LYSOL®.
CAS #: 77-92-9
Diluent: Adjusts the concentration of ingredients in a product to deliver target benefits.
Ingredient descriptions are provided by LYSOL®.
CAS #: 7732-18-5
Ingredient descriptions are provided by LYSOL®.
CAS #: 7732-18-5
Solvent: Solubilizes or dissolves at least one other substance to form a solution.
Ingredient descriptions are provided by LYSOL®.
CAS #: 29911-28-2
Ingredient descriptions are provided by LYSOL®.
CAS #: 29911-28-2
Cleaning Agent - Organic Acid: Removes hard water and limescale stains or can be used as a pH adjuster.
Ingredient descriptions are provided by LYSOL®.
CAS #: 79-14-1
Ingredient descriptions are provided by LYSOL®.
CAS #: 79-14-1
Surfactant: Surface-active agent helps remove dirt, stains, and bad smells.
Ingredient descriptions are provided by LYSOL®.
CAS #: 36445-71-3
Ingredient descriptions are provided by LYSOL®.
CAS #: 36445-71-3
Surfactant: Surface-active agent helps remove dirt, stains, and bad smells.
Ingredient descriptions are provided by LYSOL®.
CAS #: 68585-47-7
Ingredient descriptions are provided by LYSOL®.
CAS #: 68585-47-7
Fragrance: Changes the odor of a product to impart a pleasant odor or impart a pleasant fragrance in the air during or after product use.
Ingredient descriptions are provided by LYSOL®.
CAS #: Fragrance
Ingredient descriptions are provided by LYSOL®.
CAS #: Fragrance
Surfactant: Surface-active agent helps remove dirt, stains, and bad smells.
Ingredient descriptions are provided by LYSOL®.
CAS #: 68987-81-5
Ingredient descriptions are provided by LYSOL®.
CAS #: 68987-81-5
Fragrance Component: A component of a fragrance oil.
Ingredient descriptions are provided by LYSOL®.
CAS #: 80-26-2
Ingredient descriptions are provided by LYSOL®.
CAS #: 80-26-2
Fragrance Component: A component of a fragrance oil.
Ingredient descriptions are provided by LYSOL®.
CAS #: 80-54-6
Ingredient descriptions are provided by LYSOL®.
CAS #: 80-54-6
This ingredient appears on one or more Designated Lists
EU CMRs: Chemicals classified by the European Union as carcinogens, mutagens, or reproductive toxicants pursuant to Category 1A or 1B in Annex VI to Regulation (EC) 1272/2008. more info…
Fragrance Component: A component of a fragrance oil.
Ingredient descriptions are provided by LYSOL®.
CAS #: 18479-58-8
Ingredient descriptions are provided by LYSOL®.
CAS #: 18479-58-8
Fragrance Component: A component of a fragrance oil.
Ingredient descriptions are provided by LYSOL®.
CAS #: 25265-71-8
Ingredient descriptions are provided by LYSOL®.
CAS #: 25265-71-8
Fragrance Component: A component of a fragrance oil.
Ingredient descriptions are provided by LYSOL®.
CAS #: 97-53-0
Ingredient descriptions are provided by LYSOL®.
CAS #: 97-53-0
This ingredient appears on one or more Designated Lists
AOEC Asthmagens: Chemicals designated as asthmagens by the Association of Occupational and Environmental Clinics. more info…
Fragrance Component: A component of a fragrance oil.
Ingredient descriptions are provided by LYSOL®.
CAS #: 97-54-1
Ingredient descriptions are provided by LYSOL®.
CAS #: 97-54-1
This ingredient appears on one or more Designated Lists
IARC Carcinogens : Group 1, 2A, or 2B carcinogens identified by the International Agency for Research on Cancer. more info…
Non-Functional Constituent: Non-Functional Constituent
Ingredient descriptions are provided by LYSOL®.
CAS #: 7757-82-6
Ingredient descriptions are provided by LYSOL®.
CAS #: 7757-82-6
This ingredient appears on one or more Designated Lists
CA Non-Cancer Hazards: Chemicals that are identified with noncancer endpoints and listed with an inhalation or oral reference exposure level by the Office of Environmental Health Hazard Assessment pursuant to paragraph (2) of subdivision (b) of Section 44360. more info…
Non-Functional Constituent: Non-Functional Constituent
Ingredient descriptions are provided by LYSOL®.
CAS #: 57-55-6
Ingredient descriptions are provided by LYSOL®.
CAS #: 57-55-6
This ingredient appears on one or more Designated Lists
NY DOH MCLs: Chemicals for which Maximum Contaminant Levels have been established and adopted in Tables 1, 3, 3A, and 7 of Subpart 5-1.52 of Title 10 of the New York Code of the Rules and Regulations (10 NYCRR Subpart 5-1.52). more info…
The list above contains the product ingredients listed in descending weight percent within each category. The ingredient names use the INCI (or equivalent) nomenclature system. Click here for more information on the nomenclature system.
Human Health
FIRST AID:
If in eyes: • Hold eye open and rinse slowly and gently with water for 15-20 minutes. • Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. • Call a Poison Control Center or doctor for treatment advice.
CONTACT NUMBER: Questions? Comments of In case of an emergency, call toll free 1-800-228-4722. Have the product container of label with you when calling a Poison Control Center, or doctor, or going for treatment.
Click here Safety Data Sheet (United States - Spanish)
Storage and Disposal
Store in areas inaccessible to small children. Keep securely closed. Refillable container. Refill trigger bottle only with this product. If not refilling, discard in trash or offer for recycle. Do not reuse this trigger bottle for any other purpose.
Usage Instructions
Use on all washable hard, non-porous surfaces that can be found in the bathroom.
Great on glazed porcelain and glazed ceramic tile, stainless steel fixtures, laminated plastic, linoleum and vinyl. For all other surfaces, test on a small hidden area before use.
DIRECTIONS FOR USE: It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
Spray 6-8" from surface.
TO OPERATE: Turn nozzle to ON position.
- To Clean: Spray surface until thoroughly wet. Wipe with a clean cloth or sponge.
- To Clean Lime Scale and Soap Scum: Allow product to sit 15-20 seconds to penetrate soil before wiping clean. Repeat if necessary.
- To Sanitize / Disinfect: Pre-clean surface. Spray surface until thoroughly wet.
- To Sanitize: Leave for 30 seconds before wiping.
- To Disinfect: Leave for 10 minutes before wiping.
- To Control Mold & Mildew: Spray 6-8" from pre-cleaned surface. Let surface remain wet for 3 minutes and then allow to air dry. Repeat application at weekly intervals or when mold and mildew growth appears. Rinse bathtub / shower surfaces with water after using product.
To Refill: Remove trigger sprayer. Pour in product from refill container and replace trigger. If the last portion of this product is difficult to disperse, turn trigger 180º to face opposite direction; this will ensure full use of its contents.
Does not harm most bathroom surfaces. May discolor painted surfaces including decorative tile and colored grout. May etch some older sinks and tubs. Do not use on marble surfaces.
Claims listed within SmartLabel™ are either governed by entities such as the USDA, FDA, EPA, etc. or defined by participating brands.
Item Benefits / Features
• Kills 99.9% of Viruses and Bacteria** • Removes Tough Soap Scum • Leaves Your Bathroom Smelling Clean & Fresh • Tough on Lime Scale • Sanitizes Bathroom & Restroom Surfaces in 30 Seconds***
**Kills 99.9% of Escherichia coli 0157:H7, Salmonella enterica, Staphylococcus aureus, Rhinovirus Type 39, and Rotavirus WA on hard, non-porous surfaces in 10 minutes.
***Kills 99.9% of Enterobacter aerogenes and Staphylococcus aureus on hard, non-porous surfaces in 30 seconds.
10X SOAP SCUM REMOVAL vs. Lysol Bleach Multi-Purpose Cleaner on soap scum.
Important Facts: Contains no phosphates. This bottle is made of 25% post-consumer recycled plastic.
